Cost Breakdown to Date #3

I finally ordered the coin door, additional black horizontal pushbuttons (for the admin buttons on the control panel) and the marquee retainer. I ordered all Happ parts from a BYOAC member who sells to the arcade building community cheaper than Happ does (and doesn't kill you on shipping). These parts should be here early next week!

Here's the breakdown so far:

Bought:
MDF: $35.00/4'x8' sheet x 2 sheets = $70
Screws: $5.98/box x 1 box = $5.98
18" flourescent light (for behind marquee): $8.97
Wood support strips: $0.97/foot x 12 feet = $11.64
3 buttons, balltop joystick, t-molding from Dream Arcades = $32.75
Smart Strip power supply = $37.31
Hinges and magnetic clasp = $8.43
Ultimarc 360 Joystick = $59.00 (+$14.00 shipping)
Ultimarc Encoder Harness (for button wiring) = $8.00
Ultimarc Restrictor Plate (to shorten joystick throw) = $14.00
Ultimarc Hard Spring (to tighten joystick movement) = $5.00
Computer Speakers (2.1) = $21.39
Happ Small Single Coin Door = $59.95 (+$17.00 shipping)
Happ Six (6) black buttons with microswitch @1.35ea. = $8.10
Happ 60" Marquee Retainer @$5.00 per 30" = $10.00
Four (4) Speaker Grills from Chokes Unlimited = $10.84

TOTAL so far: $402.36

To buy:
Marquee
Dell 17" LCD Monitor
Primer/Paint/rubbing compound (for finish)
1/4" Glass (to cover monitor)
Black Posterboard (for bezel)

There's not much left to purchase! I was hoping to keep this project under $500 but it looks like I will be over $600 once I order the monitor. Bummer.